compro osciloscopio
Moderadores: J.A. Sanz, F.J. Lopez, J. Lago, J.J. Ruiz, X. Pascual
compro osciloscopio
busco un osciloscopio
osciloscopio
cuanto pides por el osciloscopio
osciloscopio
pues no se, tu diras.
- Antonio Martinez
- cortando encendido
- Mensajes: 275
- Registrado: Lun Nov 16, 2009 12:17 am
- Ubicación: ESP
- Contactar:
yo tengo un owon estas son las especificaciones puedo mandar manual el osciloscopio solo lo e usado una vez y lo vendo por que no lo uso un saludo Muestreo (Sampling)
Sampling modes Normal sampling
Deteccion de picos (Peak detection)
Valor medio (Average value)
Sampling rate 100 MSa/s
Entrada (Input)
Input coupling DC, AC
Input impedance 1MO ±2% connected in parallel with 20pF±5pF
Probe attenuation coefficient 1X, 10X, 100X, 1000X
Max. Input voltage 400V (peak)
Channel delay time( typical) 150ps
Horizontal
Sampling rate range 10S/s~ 100MS/s
Waveform interpolation ( sin x) /x
Record length 6K points on each channel
Scanning speed range( S/div) 5ns/div~ 5s/div, stepping in the “1-2.5-5†mode.
Sampling rate and relay time
accuracy
±100ppm(any time interval which is equal to or larger than
1ms)
Time interval (? T)measurement
accuracy( full bandwidth)
Single: ± (1 sampling interval time+100ppm ×
reading+0.6ns)
>average 16 : ±(1 sampling interval time +100ppm×
reading+0.4ns)
HDS1022M-N 9-Apendice
62
Vertical
Analog digital converter( A/D) With the resolution of 8 bits, make sampling on both
channels synchronously.
Sensitivity range ( V/div) 5mV/div~ 5V/div( at the input BNC)
Displacement range ±50V(500mV~ 5V),±1V(5mV~ 200mV)
Analog bandwidth 20M
Single bandwidth Full bandwidth
Low frequency response ( AD
coupling, -3dB)
= 5Hz( at the BNC )
Rise time( typical one at the BNC) = 17.5ns
DC gain accuracy ±5%
DC measurement accuracy( average
value sampling mode)
The voltage difference (? V) between any two points on
the waveform after averaging the captured waveforms
more than 16: ±(5% reading + 0.05 divisions).
Disparo (Trigger)
DC
coupling
Trigger sensitivity ( Edge CH1 and CH2: 1div(DC~ full bandwidth)
triggering)
AC
coupling
Same as the DC coupling when it is equal to or
larger than 50Hz.
Triggering level range ±6 divisions from the screen center
Triggering level accuracy
(typical) which is applicable to
the signal with rise and fall
time equal to or longer than
20ns
±0.3 divisions
Trigger displacement 655 divisions for pre-triggering and 4 divisions for posttriggering
Make a 50% level setting
(Typical).
Operation with the input signal frequency equal to or larger than
50Hz.
Trigger sensitivity (Video
triggering and typical mode)
2 divisions of peak-to-peak value
Signal system and line/field
frequency (Video triggering
mode)
Support the NTSC, PAL and SECAM broadcasting systems of
any field or line frequency.
Medida (Measurement)
Cursor measurement Voltage difference (? V) and time difference (? T) between cursors
Auto measurement Peak-to-Peak voltage, mean voltage, root mean square value, frequency
and period.
HDS1022M-N 9-Apendice
63
Prueba (Probe)
1X position 10X position
Bandwidth Up to 6 MHz (DC) Up to full bandwidth (DC)
Attenuation rate 1: 1 10: 1
Compensation range 20pf~ 40pf
Input resistance 1MO ±2% 10MO ±2%
Input impendence 85pf~ 115pf 14.5pf~ 17.5pf
Input voltage 150 V DC 300 V DC
9.1.2 Metro (Meter)
Tensión (Voltage) (VDC)
Entrada de impedancia (Input Impedance) 10MO .
Max. Input Voltage: 1000V (DC or AC peak-to-peak value)
Range Accuracy Resolution
400.0mv ±1.5%±2digit 100uV
4.000V 1mV
40.00V 10mV
400.0V
±1%±1 digit
100mV
Voltage (VAC)
Input Impedance: 10MO .
Max. Input Voltage: 750V (AC, virtual value)
Frequency range: from 40Hz to 400Hz.
Display: Virtual value of the sine wave
Range Accuracy Resolution
4.000V 1mV
40.00V 10mV
400.0V
±1%±3 digits
100mV
Corriente continua (Direct Current) (DC)
Range Accuracy Resolution
40.00mA ±1.5%±1 digit 10uA
400.0mA ±1.5%±1 digit 100uA
10A ±3%±3 digit 10mA
HDS1022M-N 9-Apendice
64
Corriente alterna (Alternating Current) (AC)
Range Accuracy Resolution
40.00mA ±1.5%±3 digit 10uA
400.0mA ±2%±1 digit 100uA
10A ±5%±3digit 10mA
Resistencia (Resistance)
Range Accuracy Resolution
400.0 O ±1%±3 digit 0.1O
4.000KO 1O
40.00KO 10O
400.0KO 100O
4.000MO
±1%±1 digit
1KO
40.00MO ±1.5%±3 digit 10KO
Capacidad (Capacitance)
Range Accuracy Resolution
51.20nF 10pF
512.0nF 100pF
5.120uF 1nF
51.20uF 10nF
100uF
±3%±3 digit
100nF
Diodo (Diode)
Voltage reading: 0 V ~ 1.5 V.
On-off Test
There is a beep sound when the on-resistance is less than 30O .
9.1.3 Especificaciones generales (General Specifications)
Parámetros básicos (Basic parameter)
Mechanical dimension 18 cm×11.5cm×4cm
Weight 645 g
Power consumption < 6 W
Display type 3.8\" color liquid crystal display
Display resolution 320 (horizontal) ×240 (vertical) pixels
Display color 4096 colors
Adaptador de corriente (Power Adapter)
Power supply 100-240 V AC 50/60Hz
Power output 8.5 VDC
Current output 1500 mA
HDS1022M-N 9-Apendice
65
Ambiente de rabajo (Working environment)
Temperature
Operation
Used battery 0 to 50 °C (32 to 122 °F)
Power adapter 0 to 40 °C (32 to 104 °F)
Storage. -20 to +60 °C (-4 to 140 °F)
Temperature
Operation:
0 to 10 °C (32 to 50 °F) no condensation
10 to 30 °C (50 to 86 °F) 95 %
30 to 40 °C (86 to 104 °F) 75 %
40 to 50 °C (104 to 122 °F) 45 %
storage
-20 to +60 °C (-4 to +140 °F). no condensation
Sampling modes Normal sampling
Deteccion de picos (Peak detection)
Valor medio (Average value)
Sampling rate 100 MSa/s
Entrada (Input)
Input coupling DC, AC
Input impedance 1MO ±2% connected in parallel with 20pF±5pF
Probe attenuation coefficient 1X, 10X, 100X, 1000X
Max. Input voltage 400V (peak)
Channel delay time( typical) 150ps
Horizontal
Sampling rate range 10S/s~ 100MS/s
Waveform interpolation ( sin x) /x
Record length 6K points on each channel
Scanning speed range( S/div) 5ns/div~ 5s/div, stepping in the “1-2.5-5†mode.
Sampling rate and relay time
accuracy
±100ppm(any time interval which is equal to or larger than
1ms)
Time interval (? T)measurement
accuracy( full bandwidth)
Single: ± (1 sampling interval time+100ppm ×
reading+0.6ns)
>average 16 : ±(1 sampling interval time +100ppm×
reading+0.4ns)
HDS1022M-N 9-Apendice
62
Vertical
Analog digital converter( A/D) With the resolution of 8 bits, make sampling on both
channels synchronously.
Sensitivity range ( V/div) 5mV/div~ 5V/div( at the input BNC)
Displacement range ±50V(500mV~ 5V),±1V(5mV~ 200mV)
Analog bandwidth 20M
Single bandwidth Full bandwidth
Low frequency response ( AD
coupling, -3dB)
= 5Hz( at the BNC )
Rise time( typical one at the BNC) = 17.5ns
DC gain accuracy ±5%
DC measurement accuracy( average
value sampling mode)
The voltage difference (? V) between any two points on
the waveform after averaging the captured waveforms
more than 16: ±(5% reading + 0.05 divisions).
Disparo (Trigger)
DC
coupling
Trigger sensitivity ( Edge CH1 and CH2: 1div(DC~ full bandwidth)
triggering)
AC
coupling
Same as the DC coupling when it is equal to or
larger than 50Hz.
Triggering level range ±6 divisions from the screen center
Triggering level accuracy
(typical) which is applicable to
the signal with rise and fall
time equal to or longer than
20ns
±0.3 divisions
Trigger displacement 655 divisions for pre-triggering and 4 divisions for posttriggering
Make a 50% level setting
(Typical).
Operation with the input signal frequency equal to or larger than
50Hz.
Trigger sensitivity (Video
triggering and typical mode)
2 divisions of peak-to-peak value
Signal system and line/field
frequency (Video triggering
mode)
Support the NTSC, PAL and SECAM broadcasting systems of
any field or line frequency.
Medida (Measurement)
Cursor measurement Voltage difference (? V) and time difference (? T) between cursors
Auto measurement Peak-to-Peak voltage, mean voltage, root mean square value, frequency
and period.
HDS1022M-N 9-Apendice
63
Prueba (Probe)
1X position 10X position
Bandwidth Up to 6 MHz (DC) Up to full bandwidth (DC)
Attenuation rate 1: 1 10: 1
Compensation range 20pf~ 40pf
Input resistance 1MO ±2% 10MO ±2%
Input impendence 85pf~ 115pf 14.5pf~ 17.5pf
Input voltage 150 V DC 300 V DC
9.1.2 Metro (Meter)
Tensión (Voltage) (VDC)
Entrada de impedancia (Input Impedance) 10MO .
Max. Input Voltage: 1000V (DC or AC peak-to-peak value)
Range Accuracy Resolution
400.0mv ±1.5%±2digit 100uV
4.000V 1mV
40.00V 10mV
400.0V
±1%±1 digit
100mV
Voltage (VAC)
Input Impedance: 10MO .
Max. Input Voltage: 750V (AC, virtual value)
Frequency range: from 40Hz to 400Hz.
Display: Virtual value of the sine wave
Range Accuracy Resolution
4.000V 1mV
40.00V 10mV
400.0V
±1%±3 digits
100mV
Corriente continua (Direct Current) (DC)
Range Accuracy Resolution
40.00mA ±1.5%±1 digit 10uA
400.0mA ±1.5%±1 digit 100uA
10A ±3%±3 digit 10mA
HDS1022M-N 9-Apendice
64
Corriente alterna (Alternating Current) (AC)
Range Accuracy Resolution
40.00mA ±1.5%±3 digit 10uA
400.0mA ±2%±1 digit 100uA
10A ±5%±3digit 10mA
Resistencia (Resistance)
Range Accuracy Resolution
400.0 O ±1%±3 digit 0.1O
4.000KO 1O
40.00KO 10O
400.0KO 100O
4.000MO
±1%±1 digit
1KO
40.00MO ±1.5%±3 digit 10KO
Capacidad (Capacitance)
Range Accuracy Resolution
51.20nF 10pF
512.0nF 100pF
5.120uF 1nF
51.20uF 10nF
100uF
±3%±3 digit
100nF
Diodo (Diode)
Voltage reading: 0 V ~ 1.5 V.
On-off Test
There is a beep sound when the on-resistance is less than 30O .
9.1.3 Especificaciones generales (General Specifications)
Parámetros básicos (Basic parameter)
Mechanical dimension 18 cm×11.5cm×4cm
Weight 645 g
Power consumption < 6 W
Display type 3.8\" color liquid crystal display
Display resolution 320 (horizontal) ×240 (vertical) pixels
Display color 4096 colors
Adaptador de corriente (Power Adapter)
Power supply 100-240 V AC 50/60Hz
Power output 8.5 VDC
Current output 1500 mA
HDS1022M-N 9-Apendice
65
Ambiente de rabajo (Working environment)
Temperature
Operation
Used battery 0 to 50 °C (32 to 122 °F)
Power adapter 0 to 40 °C (32 to 104 °F)
Storage. -20 to +60 °C (-4 to 140 °F)
Temperature
Operation:
0 to 10 °C (32 to 50 °F) no condensation
10 to 30 °C (50 to 86 °F) 95 %
30 to 40 °C (86 to 104 °F) 75 %
40 to 50 °C (104 to 122 °F) 45 %
storage
-20 to +60 °C (-4 to +140 °F). no condensation
- Antonio Martinez
- cortando encendido
- Mensajes: 275
- Registrado: Lun Nov 16, 2009 12:17 am
- Ubicación: ESP
- Contactar: